As the population of our planet rises, or goes through long-term results of accidental injuries and weakening medical conditions, the demand for improvements of businesses and homes also increases. Among the major advancements is the inclusion of a handicap ramp to make sure safe accessibility. Before you grab a hammer, or hire help, discover ways to build a ramp and choose your wheelchair ramp design.
A lot of people will create unusual ways of having a wheelchair get into an inaccessible house. Perhaps a few strong men will risk it and just pick up the wheelchair. Some may grab the boards and after strategically positioning the planks, will roll the wheelchair above the steps. But both techniques are unsafe. Well, both ways are just a temporary solution. So, choose a wheelchair ramp design that will function correctly for easy access.
First, determine what type of materials required for your ramp. Wheelchair ramp can be created with a pre-made steel ramp that you just put together. When it comes to building the ramp, decide if it is going to be wood or concrete. For individuals building a new house, a concrete ramp may be created when the sidewalks are mixed. On the other hand, for many people, wood is an inexpensive and fast answer to address these issues.
Today, with numerous designs and plans available, it is easy to learn how to construct a handicap ramp. First, the slope must not be too high, or the wheelchair may fall over backwards, potentially contributing to a great damage. Specifications suggest a one inch slope for each foot of ramp. As an example, the steps into a residence are 15 inches high; hence the ramp has to be at least 15 feet long, with an elevation of only one inch for every foot.
Besides the length, the width of the handicap ramp should be at least one meter. Basically, the ramp needs to fit the width of the wheelchair. In case a child is using a smaller wheelchair. The ramp still has to be one meter wide, because the kid will require an adult wheelchair in due time.
The measurements are completed, now what? the wheel protections are an efficient safety element when constructing a handicap ramp. A 1-2 inch high wheel guard can prevent a wheel from falling off the side while in use. At times, a handicapped person could be stuck or slipped off the ramp, which can lead to serious harm. So, the side protections are very important. Additionally, side rails are beneficial for the same reasons. The rails make it possible for the handicapped individual to pull himself up the ramp.
Learn the way to create a handicap ramp with safety as the primary goal. Make sure that the grade is not too high, the wheel guards and side rails are in place, and then the right texture has been put into the surface for extra safety. Use a desired wheelchair ramp design, and be safe.
Aluminum Ramps 
Leave a comment